Double Flute End Mill Cutting Bit

Double Flute tungsten carbide end mill to cut a wide variety of materials.  A double flute cutter has a flat bottom end which creates a smooth bottom surface.  The low flute count also work better with materials which is sensitive to heat generated by the cutting bit, like plastics.  

Specifications:

• Bit Type: Double flute end mill cutter
• Material: Tungsten Carbide
• Diameter: 1mm, 1.5mm, 2mm, 2.5mm, 3.175mm, 4mm, 6mm (Please select from the menu above)
• Materials to cut: Wood, Plastic, Aluminium, Brass, Composites, Cardboard and Structural foam
•  Cutting Edge Length:
• For 1mm bit: 6mm
• For 1.5mm bit: 8mm
• For 2mm bit: 12mm
• For 2.5mm bit: 15mm
• For 3.175mm bit: 22mm
• For 4mm bit: 10mm
• For 6mm bit: 15mm
• Shank Diameter:
• For 1mm bit: 3.175mm (1/8')
• For 1.5mm bit: 3.175mm (1/8')
• For 2mm bit: 3.175mm (1/8')
• For 2.5mm bit: 3.175mm (1/8')
• For 3.175mm bit: 3.175mm (1/8')
• For 4mm bit: 4mm
• For 6mm bit: 6mm
• Cutting bit total length:
• 1mm to 2.5mm: 38mm
• 3.175mm, 4mm & 6mm: 45mm
•